Obiekt
Tytuł: The impact of additives applied to the lubricant on the burnishing process and tribological properties
Autor:
Adamczuk, Krzysztof ; Dębowski, Daniel ; Wojciechowski, Szymon ; Kozak, Dražan ; Zabłocki, Miłosz
Data wydania:
Typ zasobu:
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The aim of this study was to determine the impact of additions of tungsten carbide and silicon carbide microparticles to the lubricant used in the burnishing process on the tribological properties of friction pairs. The cylinders made of AISI 1045 steel constituted a workpiece. Burnishing was made with a lubricant the SN150 base oil with addition of tungsten carbide and silicon carbide microparticles. The tested materials were burnished with forces of 1000 N and 1500 N. Before and after the burnishing process, the surface roughness and hardness of the tested materials were measured. ; The study also presents the results of tribological properties of friction pairs with the tested structural materials. It was found that the addition of tungsten carbide microparticles to the base oil in the burnishing process can result in improved surface quality and reduced surface roughness. The results also confirmed the effect of addition of tungsten carbide and silicon carbide to the lubricant used in the burnishing process on tribological properties.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 28, number 2 (2023)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2023)
Data ostatniej modyfikacji:
2023-07-07
Data dodania obiektu:
2023-07-07
Liczba wyświetleń treści obiektu:
89
Wszystkie dostępne wersje tego obiektu:
https://www.zbc.uz.zgora.pl/publication/82323
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023) - spis treści
- Shear strength characteristics of weathered jointed Kenny Hill interbedded formation for cylindrical specimen under direct shear test
- The impact of additives applied to the lubricant on the burnishing process and tribological properties
- Comparison of the post-tensioned, solid, hollow block, and flat slabs in terms of economy considering different span lengths
- Computational scheme for a differential - difference equation with a large delay in convection term
- Lubrication of asymmetric rollers considering viscosity as function of mean temperature
- Impacts of chemical reactions on inclined isothermal vertical plate
- Numerical study of a transient MHD flow across an oscillating vertical plate with thermal radiation and viscous dissipation
- An unsteady electro-magnetohydrodynamic two-liquid plasma flow along a channel of insulating porous plates with hall currents
- Research on low density polyethylene (LDPE), recycled by advanced thermal analysis (DSC, TG)
- Thermal efficiency analysis of the rotary kiln based on the wear of the lining
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 3 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 4 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| The impact of additives applied to the lubricant on the burnishing process and tribological properties | 2023-07-07 |
