Obiekt
Tytuł: Shear strength characteristics of weathered jointed Kenny Hill interbedded formation for cylindrical specimen under direct shear test
Autor:
Abbas, Hasan Ali ; Mohamed, Zainab ; Taher, Muntadher J. ; Kudus, Sakhiah Abdul ; Ghaltan, Hasanain Muhammad ; Salman, Manaf Raid
Data wydania:
Typ zasobu:
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The sliding failures commonly occur in interbedded formations along the weakness plane of the bedding plane a sedimentary rock or the joint interface. Therefore, studying the shear strength characteristics at the bedding plane or interface is crucial for evaluating the expected failure plane. In this study, the shear strength characteristics of planar jointed Kenny Hill shale, sandstone, and shale-sandstone specimens were investigated using the direct shear box method. ; The results reveal that the friction angle values for the planar sandstone, shale-sandstone, and shale are 31.28 [degress], 21.1 [degress], and [degress], respectively. These findings, combined with the shear stress-strain behavior, suggest that the interface (shale-sandstone) is primarily influenced by the shale characteristics rather than the sandstone characteristics. Hence, it is important to consider failure along the interface when analyzing critical conditions, particularly in slope failure scenarios.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 28, number 2 (2023)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2023)
Data ostatniej modyfikacji:
2023-07-07
Data dodania obiektu:
2023-07-07
Liczba wyświetleń treści obiektu:
47
Wszystkie dostępne wersje tego obiektu:
https://www.zbc.uz.zgora.pl/publication/82322
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 2 (2023) - spis treści
- Shear strength characteristics of weathered jointed Kenny Hill interbedded formation for cylindrical specimen under direct shear test
- The impact of additives applied to the lubricant on the burnishing process and tribological properties
- Comparison of the post-tensioned, solid, hollow block, and flat slabs in terms of economy considering different span lengths
- Computational scheme for a differential - difference equation with a large delay in convection term
- Lubrication of asymmetric rollers considering viscosity as function of mean temperature
- Impacts of chemical reactions on inclined isothermal vertical plate
- Numerical study of a transient MHD flow across an oscillating vertical plate with thermal radiation and viscous dissipation
- An unsteady electro-magnetohydrodynamic two-liquid plasma flow along a channel of insulating porous plates with hall currents
- Research on low density polyethylene (LDPE), recycled by advanced thermal analysis (DSC, TG)
- Thermal efficiency analysis of the rotary kiln based on the wear of the lining
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 3 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 4 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28, number 1 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
