Obiekt
Tytuł: Influence of welding parameters of resistance spot welding on joining aluminum with copper
Autor:
Sar, Mohammed Helan ; Ridha, Munaf Hashim ; Barrak, Osamah Sabah ; Hussein, Sabah Khammass
Data wydania:
Typ zasobu:
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
The resistance spot welding (RSW) method was used to join aluminum alloy AA 1050 and copper alloy UNS C50100 sheets. Mechanical properties of the joints were examined. The influence of welding process parameters on tensile shear force of the joints was discussed. The design of experiments (DOE) method was used to analyze the influence of welding parameters on the mechanical properties of the joints. ; Three RSW parameters were used: welding current, squeeze time, and welding time. The results showed that the joint shear stress increased with increasing the welding current until a value of 12000 Amp. Then the shear stress decreased. The tensile shear stress increased with increasing the welding and squeeze time. As a consequence, it can be possible to weld copper with aluminum by RSW.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 27, number 2 (2022)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2022)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-02-03
Liczba wyświetleń treści obiektu:
67
Wszystkie dostępne wersje tego obiektu:
https://www.zbc.uz.zgora.pl/publication/77390
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022) - spis treści
- Influence of slip parameter, viscous dissipationand joule heating effect on boundary layer flow and heat transfer over a power-law stretching wedge-shaped surface with the correlation coefficient and multiple regressions
- Heat transfer by natural convection from a heated square inner cylinder to its elliptical outer enclosure utilizing nanofluids
- Analysis of deflection in visco-thermoelastic beam resonators subjected to harmonic loading
- Reflection and transmission in non-local couple stress micropolar thermoelastic media
- Heat transfer in oscillating flow through porous medium with dissipative heat
- Effect of the inner diameter and Reynolds number on the recirculation zone in annular jet flow
- A study of mhd fluid with second order slip and thermal flow over a nonlinear stretching sheet
- Comparison of the results for calculation of vortex currents after sudden expansion of the pipe with different diameters
- Modeling and optimization of cutting parameters when turning EN-AW-1350 aluminum alloy
- Promising wing vibration measurement system using MEMS IMUS and Kalman filter correction
- Combined effects of helical force and rotation on stationary convection of a binary ferrofluid in a porous medium
- On a couple-stress Rivlin-Ericksen ferromagnetic fluid heated from below with varying gravity, rotation, magnetic field and suspended particles flowing through a porous medium
- Numerical study on thermal performance of water flow in a twisted duct heat exchanger
- Influence of welding parameters of resistance spot welding on joining aluminum with copper
- Chemical reaction and MHD flow for magnetic field effect on heat and mass transfer of fluid flow through a porous medium onto a moving vertical plate
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Influence of welding parameters of resistance spot welding on joining aluminum with copper | 2023-07-06 |
