Obiekt
Tytuł: Friction spot lap joining of aluminum alloy AA6061 to pre-holed and threaded carbon steel AISI 1006
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
This work addresses to joining aluminum alloy AA6061 to carbon steel AISI 1006 sheets using the friction spot joining technique. The steel sheets were pre-holed and threaded with an internal M6 thread. The joining process was carried out by extruding the aluminum through the steel hole and thread using a rotating tool with friction between the tool and aluminum. ; Three process parameters were used: pre-heating time, rotating speed and plunging depth of the tool, with four levels for each parameter. The results indicated that the two materials joined by a micro-scale mechanical interlock at an interface line of a width ranged between 0.7 to ~ 2.5 mm. The joint`s shear force reached a minimum and maximum value of 2000 and 2500 N, respectively. The plunging depth was the most effective factor affecting the amount of the extruded aluminum and the joint`s shear force.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 27, number 1 (2022)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2022)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-02-02
Liczba wyświetleń treści obiektu:
44
Wszystkie dostępne wersje tego obiektu:
https://www.zbc.uz.zgora.pl/publication/77350
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022) - spis treści
- Vertical extension of a multi-storey reinforced concrete building
- An effect of binary fluid on the thermal performance of pulsation heat pipe
- Crack growth diagnostic of ball bearing using vibration analysis
- Improvement of the graphical method for plotting the shear and moment diagrams for members subjected to linearly varying loads
- Friction spot lap joining of aluminum alloy AA6061 to pre-holed and threaded carbon steel AISI 1006
- Transient flow through a porous channel with ramped pressure gradient and velocity slip boundary condition
- Difference scheme for differential-difference problems with small shifts arising in computational model of neuronal variability
- Thermosensitive response of a functionally graded cylinder with fractional order derivative
- Unsteady electro-magneto hydrodynamic flow and heat transfer of two ionized fluids in a rotating system with Hall currents
- Key determinants for high-alloyed cast irons for mechanical engineering
- Newtonian heating effect on heat absorbing unsteady MHD radiating and chemically reacting free convection flow past an oscillating vertical porous plate
- Effect of MHD on unsteady oscillatory couette flow through porous media
- An extended finite difference method for singular perturbation problems on a non-uniform mesh
- Effect of biodiesel blended fuel on the performance and emission characteristics of diesel engines - a review
- Experimental regulating parameters of bladder-type hydraulic accumulator
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Friction spot lap joining of aluminum alloy AA6061 to pre-holed and threaded carbon steel AISI 1006 | 2023-07-06 |
