Obiekt
Tytuł: Two-zone simulation of an axial vane rotary engine cycle
Współtwórca:
Tytuł publikacji grupowej:
Abstract:
An axial vane rotary engine (AVRE) is a novel type of rotary engines. The engine is a positive displacement mechanism that permits the four "stroke" action to occur in one revolution of the shaft with a minimum number of moving components in comparison to reciprocating engines. ; In this paper, a two-zone combustion model is developed for a spark ignition AVRE. The combustion chamber is divided into burned and unburned zones and differential equations are developed for the change in pressure and change in temperature in each zone. ; The modelling is based on equations for energy and mass conservation, equation of state, and burned mass fraction. The assumption is made that both zones are at the same pressure "P", and the ignition temperature is the adiabatic flame temperature based on the mixture enthalpy at the onset of combustion. ; The developed code for engine simulation in MATLAB is applied to another engine and there is a good agreement between results of this code and results related to the engine chosen for validation, so the modelling is independent of configuration.
Wydawca:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Identyfikator zasobu:
DOI:
Strony:
Źródło:
IJAME, volume 26, number 2 (2021)
Jezyk:
Licencja:
Licencja CC BY-NC-ND 4.0:
Prawa do dysponowania publikacją:
Biblioteka Uniwersytetu Zielonogórskiego
Kolekcje, do których przypisany jest obiekt:
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Jednostki organizacyjne > Wydział Mechaniczny
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Typy utworów > Artykuły
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME)
- Zielonogórska Biblioteka Cyfrowa > Repozytorium > Czasopisma naukowe i serie wydawnicze UZ > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2021)
Data ostatniej modyfikacji:
2023-07-06
Data dodania obiektu:
2023-02-07
Liczba wyświetleń treści obiektu:
38
Wszystkie dostępne wersje tego obiektu:
https://www.zbc.uz.zgora.pl/publication/77611
Wyświetl opis w formacie RDF:
Wyświetl opis w formacie OAI-PMH:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 1 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 2 (2021)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 2 (2021) - spis treści
- Dynamic vibration extinguished on a viscously elastic base
- Thermal performance enhancement of the mixed convection between two parallel plates by using triangular ribs
- Analysis of transient natural convective flow of a nanofluid in a vertical tube
- Reflection-refraction coefficients and energy ratios in couple stress micropolar thermoviscous elastic solid
- Modelling of equivalent mass and rigidity of continual segment of the inter-resonance vibration machine
- Effect of hall currents on unsteady magnetohydrodynamic two-ionized fluid flow and heat transfer in a channel
- Convective flow of hydromagnetic couple stress fluid with varying heating through vertical channel
- Natural frequencies of FG plates with two new distribution of porosity
- Two-zone simulation of an axial vane rotary engine cycle
- Numerical solution of singularly perturbed two parameter problems using exponential splines
- A numerical approach to slip flow of a micropolar fluid above a flat permeable contracting surface
- Thermal stresses due to non-uniform internal heat generation in functionally graded hollow cylinder
- FEM study of a steel corrugated web plate girder subjected to fire
- Chaotic assessment of the heave and pitch dynamics motions of air cushion vehicles
- Micropolar flow over a black isothermal plate in the presence thermal radiation
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 3 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 4 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26, number 1 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Nazwa wydania | Data |
|---|---|
| Two-zone simulation of an axial vane rotary engine cycle | 2023-07-06 |
