Object
Title: An investigation of the suspension characteristics of the line model of the vehicle using the Taguchi method
Creator:
Stojanovic, Nadica ; Jweeg, Muhsin Jaber ; Grujic, Ivan ; Petrovic, Miroslav ; Muhsen, Sami ; Abdullah, Oday I.
Date:
Resource Type:
Contributor:
Group publication title:
Abstract:
It can be considered that the suspension system is one of the most important systems in the VEHICLE. Where it is responsible for the stability and balance of the vehicle`s structure on the roads and curves to ensure the comfort of passengers. Also, it absorbs the shocks resulting from the unevenness of the road and prevents it from reaching the wheelhouse. ; The influence of the suspension constructive parameters in order to obtain the smallest level of displacements of the sprung mass has been investigated. The following control parameters are the stiffness of the sprung, unsprung mass, and the damping of the sprung mass. ; The parameter which affects most displacements of the sprung mass was determined by applying the analysis of variance (ANOVA). The investigation was conducted using MATLAB/SIMULINK software, and a line model of a quarter of the vehicle was created. It was determined that the stiffness of sprung has the most significant influence on the displacement of the sprung -mass, which further affect the vehicle`s comfort.
Publisher:
Zielona Góra: Uniwersytet Zielonogórski
Format:
Resource Identifier:
DOI:
Pages:
Source:
IJAME, volume 27, number 4 (2022)
Language:
License:
License CC BY-NC-ND 4.0:
Rights:
Biblioteka Uniwersytetu Zielonogórskiego
Object collections:
- Digital Library of Zielona Góra > Repository > Faculties > Faculty of Mechanical Engineering
- Digital Library of Zielona Góra > Repository > Types of work > Articles
- Digital Library of Zielona Góra > Repository > Scientific journals and UZ publishing series > International Journal of Applied Mechanics and Engineering (IJAME)
- Digital Library of Zielona Góra > Repository > Scientific journals and UZ publishing series > International Journal of Applied Mechanics and Engineering (IJAME) > International Journal of Applied Mechanics and Engineering (IJAME) (2022)
Last modified:
Jul 6, 2023
In our library since:
Feb 1, 2023
Number of object content hits:
73
All available object's versions:
https://www.zbc.uz.zgora.pl/publication/77335
Show description in RDF format:
Show description in OAI-PMH format:
-
International Journal of Applied Mechanics and Engineering (IJAME)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 28 (2023)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 2 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 3 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022)
- International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 4 (2022) - spis treści
- Joining of carbon steel AISI 1006 to aluminum alloy AA6061-T6 via friction spot joining technique
- Optimization of friction stir processing parameters of aluminum alloy reinforced with hybrid nanoparticles using the Taguchi method
- Strouhal number effects on dynamic boundary layer evolution over a wedge surface from initial flow to steady flow: analytical approach
- Influence of form defect on the mechanical behavior and stress intensity factor of shrink-fitted thick-walled cylinders
- Applying optimization techniques on cold-formed C-channel section under bending
- Heat transfer effects on carbon nanotubes along a moving flat plate subjected to uniform heat flux
- Visco-elastic fluid model in an inclined porous stenosed artery with slip effect and body acceleration
- The influence of thermal expansion on flow past an inclined accelerated sectional plate with persistent mass diffusion
- Computational approach to solving a layered behaviour differential equation with large delay using quadrature scheme
- Generalized plane waves in a rotating thermoelastic double porous solid
- Two-dimensional analysis of functionally graded thermoelastic microelongated solid
- An investigation of the suspension characteristics of the line model of the vehicle using the Taguchi method
- A method for comparison of large deflection in beams
- Effect of ultrasonic peening on mechanical properties of low carbon steel AISI 1020 TIG welding joints process
- Fabrication of a high wear resistance AA7075/AL2O3 composites via liquid metallurgy process
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 27, number 1 (2022)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 26 (2021)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 25 (2020)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 24 (2019)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 23 (2018)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 22 (2017)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 21 (2016)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 20 (2015)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 19 (2014)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 18 (2013)
-
International Journal of Applied Mechanics and Engineering (IJAME), volume 29 (2024)
| Edition name | Date |
|---|---|
| An investigation of the suspension characteristics of the line model of the vehicle using the Taguchi method | Jul 6, 2023 |
