Autor:
Belkadi, Ahmed Abderraouf ; Kessal, Oussama ; Bentalem, Sara ; Aggoun, Salima ; Amouri, Chahinez ; Khouadjia, Mohamed Lyes Kamel
Współtwórca:
Tytuł:
Aggregate Type Influence on Microstructural Behavior of Concrete Exposed to Elevated Temperature
Tytuł publikacji grupowej:
Temat i słowa kluczowe:
types of aggregates ; high temperature ; compressive strength ; microstructure ; mercury porosimeter ; kruszywo ; wysoka temperatura ; wytrzymałość na ściskanie ; mikrostruktura ; porozymetr rtęciowy
Abstract:
Exposure of concrete to high temperatures affects its mechanical properties by reducing the compressive strength, bending...etc. Factors reducing these properties have been focused on by several studies over the years, producing conflicting results. This article interested an important factor, that is the type of aggregates. For this, an experimental study on the behavior of concrete based on different types of aggregates: calcareous, siliceous and silico-calcareous subjected to high temperatures. ; In addition, the particle size distribution of the aggregates was chosen to be almost identical so that the latter does not affect the behavior of the concrete. Aggregates and concrete samples were subjected to a heating/cooling cycle of 300, 600 and 800 degress C at a speed of 1 degress C/min. The mechanical and physical properties of concrete before and after exposure to high temperatures were studied. In addition, a microstructural study using a scanning electron microscope and a mercury porosimeter was performed. ; Thus, a comparative study between various researches on the mechanical properties of concrete exposed to high temperatures containing different types of aggregates was carried out. The compressive strength test results showed that the concrete based on siliceous aggregates (C-S) has better mechanical performance up to 300 degress C. However, above 300 degress C, the compressive strength decreases faster compared to calcareous-based concrete (C-C). ; According to the mercury porosimeter test, at 600 degress C, C-SC and C-S concretes have the highest number of pores compared to C-C concretes. The microstructure of concrete at high temperatures was influenced mainly by the aggregate`s types and the paste-aggregate transition zone. This study reinforces the importance of standardizing test procedures related to the properties of concrete in a fire situation so that all the results obtained are reproducible and applicable in other research.
Opis:
tytuł dodatkowy: Prace z Inżynierii Lądowej i Środowiska
Wydawca:
Zielona Góra: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
Data wydania:
Typ zasobu:
Format:
DOI:
Strony:
Źródło:
Civil and Environmental Engineering Reports (CEER), no 32, vol. 1